Other
S11-MD Series
SH15-M Series
ST11-M Series
KS11 Series
SH15-M Amorphous Metal Transformers

  Brief introduction

  • The core of transformer is made by Amorphous metal, this new magnetic material enables the transformer being more energy-saving, it can provide a higher saturation magnetization, with low coercivity, low loss and low no-load current, the temperature stability is also excellent. Compared to transformers using silicon core, the no-load loss can be reduced more than 70%, the no-load current by about 80%, energy-saving effect is great, is a green environment-friendly products.

  • Amorphous Metal transformers are ideal for energy saving distribution, suited for 3-phase 50HZ, 10kv class urban and rural distribution system, and also applicable for area with high security requirements, possible applications include: petrochemical industries, public places, combined substations and other industries, it is especially suitable for electric grid in rural and developing areas where the load rate is relatively low.

    

  Features

  • Amorphous Metal Distribution Transformers (AMDT) represent the ultra-low loss design solution, delivering the highest efficiencies. Amorphous metal (AM) enables a significant reduction in no-load losses for up to 80% compared to conventional type.
  • Dyn11 Connection groups, which helps to reduce the harmonic effects and improve the quality of power supply.
  • Copper foil windings with enhanced capacity to withstand short circuit
  • Vacuum oil filling technology applied to the transformer, which can completely discharge the air bubbles, ensuring stable performance of insulating materials.
  • Reliable Hermetically sealed tank, maintenance-free.

  SELECTION CHART

   10KV PRIMARY,400V SECONDARY

型号
Type
容量
Capacity
(kVA)
电压组合(HV/LV) 联结组
标号
Connection
空载损耗
No-Load
loss(w)
负载损耗
Load
loss(w)
空载电流
No-Load
Current(%)
短路阻抗
Impedance
Voltage(%)
轨距
Gauge
(mm)
高压
HV(kV)
分接范围
(%)
低压
LV(kV)
SH15-M-30/10 30

6

6.3

6.6

10

10.5

11

±5%

±2×2.5%

0.4

Dyn11

33 600 1.7 4.0 400*550
SH15-M-50/10 50 38 870 1.3 400*550
SH15-M-63/10 63 50 1040 1.2 400*660
SH15-M-80/10 80 60 1250 1.1 400*660
SH15-M-100/10 100 75 1500 1.0 400*660
SH15-M-125/10 125 85 1800 0.9 550*820
SH15-M-160/10 160 100 2200 0.5 550*820
SH15-M-200/10 200 120 2600 0.5 550*820
SH15-M-250/10 250 140 3050 0.5 660*820
SH15-M-315/10 315 170 3650 0.5 660*820
SH15-M-400/10 400 200 4300 0.5 660*1070
SH15-M-500/10 500 240 5100 0.5 660*1070
SH15-M-630/10 630 320 6200 0.3 4.5 820*1070
SH15-M-800/10 800 380 7500 0.3 820*1070
SH15-M-1000/10 1000 450 12000 0.3 820*1070
SH15-M-1250/10 1250 530 14500 0.2 820*1070
SH15-M-1600/10 1600 630 14500 0.2 820*1070